Fluoride Ion Concentration Meter Multi Parameter Analyser

MP519 Fluoride Ion Concentration Meter:The convenient & reliable intelligent stirrer of which the fixed stirring rate can be set

Laboratory Water Quality Analysis Meter

 

 

 

Introduction&Features

 

MP519 Fluoride Ion Concentration Meter

 

1. Two-point fluoride in concentration standard solution calibration, directly testing fluoride ion concentration of samples.

2. The convenient and reliable intelligent stirrer of which the fixed stirring rate can be set.

3. Sampling measurement of the fluoride ion concentration in water solution.

 

 

Specifications:

Range	Ca2+: (0.00 to 9.00)pCa Units: pCa, mol/L, mg/L and ppm mV: ±1999.9mV Temp.: (-10 to 110)°C
Accuracy	Ca2+: ±0.01pCa mV: ±0.1% full scale Temp.: ±0.5°C
ATC	(0 to 50)°C
Storage Data	600 groups
Communication Connector	RS-232
Power	DC 9V/300mA
Dimension & Weight	(160×190×70)mm/ 880g

 

Meter Kits:

1. Model F502 fluoride ion electrode

2. Model 6211-M reference electrode

3. MP500 temperature probe.

4. Model 901 intelligent stirrer

5. Model 602 flexible electrode holder

6. RS-232 communication software

 

 

 

**************************************************

MP500 Series of Electrochemical Meters

pH/mV/ISE/Cond./Res./TDS/Sal./DO/Temp.

 

MP500 series of electrochemical meters is the perfect combination of advance electronic, sensor technology and software design. The series covers more than 10 kinds of electrochemistry measurement parameters and is classified into 14 kinds of electrochemical meters. The series is the most cost-effective laboratory water analytical instruments.

 

1. Nice appearance, easy to use, equipped with a flexible electrode holder, an intelligent stirrer and a brief operation manual.

2. Meets international GLP standards, with intelligent functions such as automatic calibration, automatic temperature compensation, data storage, time display, RS-232 output, function setup, self-diagnoses of information and etc.

3. Options of three different measurement modes: a stable display mode, timing measurement mode and continuous measurement mode.

4. Meter with a unique product serial number.

5. Meter consistent with IP54 dustproof and splash proof.

 

Features

pH and mV Measurement	1. Ability to set two special pH measurement modes for high purity water and ammonia added pure water to meet the requirement of electric power and petrochemical industry. 2. Ability to set "EH" oxidation-reduction potential (ORP) measurement mode to directly display ORP value as opposed to the standard hydrogen electrode potential.
Conductivity Measurement	1. Advanced and unique conductivity measurement technique, employment an ordinary two-ring conductivity electrode (K=1), only one-point calibration can reach the measurement precision within the scope of 200mS/cm. 2. Automatic selection of the measurement range, automatic non-linear temperature compensation for high-purity water of less than 10μS/cm.
Dissolved Oxygen Measurement	1. Automatic compensation of temperature, salinity and air pressure. 2. A new dissolved oxygen electrode with the function of salinity measurement can achieve automatic salinity compensation, short polarization time, fast response and accurate measurement.
ISE Measurement	Options of 10 kinds of common ions. Ability to input the molecular weight and ion valence to set other ions. Ability to select or switch among four measurement units: pX, mol/L, mg/L and ppm.

 

Fluoride Ion Concentration Meter Multi Parameter Analyser